Discover published sets by community

Carefully remove the old nut and replace it with a new one, ensuring it is properly seated and glued, if necessary.

Tighten the screws or replace the strap button if it becomes loose or falls out.

Remove the old strings, clean the fretboard, and then install and stretch the new strings properly.

Use fine steel wool or special fret polishing tool to shine frets without scratching the fretboard.

Adjust the truss rod to correct neck relief. Turn clockwise to tighten and counter-clockwise to loosen.

Unscrew the old pickups, disconnect the wiring, then connect and install the new pickups.

Tighten any loose bushings or screws and lubricate gears with a small amount of machine oil.

Use a soft cloth and appropriate cleaning solution to remove dirt and oils from the fretboard.

Adjust the bridge saddles to the correct distance from the nut to ensure that the guitar is intonated along the entire fretboard.