Explore tens of thousands of sets crafted by our community.
Understanding Lighting Schematics
25
Flashcards
0/25
Practicals Symbol
Indicates on-stage luminaires that are part of the scene, such as lamps or chandeliers.
Dimmer Rack Symbol
Indicates the location and capacity of dimmer racks which control the intensity of connected luminaires.
Power Source Symbol
Indicates where the electrical power for the lighting system is obtained.
Beam Angle
Shows the range of the beam spread from a light source, important for coverage calculations.
Electrical Load Table
A chart detailing the power requirements for each fixture, as well as total load on the circuits.
Spotlight Symbol
Designates a spotlight fixture in the schematic, important for specific area illumination.
Moving Head Fixture Symbol
Indicates a moving head light, which can change position and beams dynamically.
Ellipsoidal Reflector Spotlight Symbol
Designates an ERS or Leko light, providing focused, controllable light used for patterns or specials.
Haze Machine Symbol
Shows the location of a haze machine used to amplify lighting beams and create atmosphere.
Iris Symbol
Indicates an attachment to manually adjust the diameter of a light beam, often in profile lights.
Lighting Position
Shows where lights are placed, e.g., front-of-house, on-stage, or overhead battens.
Gobo Symbol
Indicates that a luminaire is equipped with a gobo for projecting patterns or shapes.
DMX Line
Represents a DMX (Digital Multiplex) connection for communication between lighting equipment.
Scrim Symbol
Represents a scrim material, a drop that can either reflect or transmit light for effects.
Barn Doors Symbol
Indicates a fixture is equipped with barn doors to control spill and shape the light.
Control Console Symbol
Represents the lighting desk or console, the central control point for lighting cues.
Channel Hookup
A list or chart showing the connection between control channels and fixtures for programming.
Color Gel Symbol
Designates that a fixture is using a color gel to change light color for design effects.
Followspot Position
Indicates the position of a manually controlled followspot used to track performers.
Circuit Paths
Depicts the electrical routing from the dimmer to the fixtures, essential for planning cable runs.
Ground Symbol
Indicates a connection to ground; an important aspect for safety in electrical schematics.
Smoke Machine Symbol
Shows the location of a smoke machine used to create fog effects and enhance lighting visibility.
LED Tape Symbol
Represents the use of LED tape which is flexible, creating continuous lines or shapes of light.
Luminaire Symbol
Represents a lighting fixture in the design. It helps in indicating the type and position of light sources.
Fresnel Symbol
Symbolizes a Fresnel fixture known for a soft-edged beam, often used in wash lighting.
© Hypatia.Tech. 2024 All rights reserved.