Discover published sets by community

A cylindrical threaded fastener with a head, used with a nut for assembling two unthreaded components.

A type of fastener with a threaded hole that mates with a bolt to secure multiple parts together.

A type of fastener that typically has a helical thread wrapped around a shaft with a head designed to be turned by a screwdriver or drill.

A flat disk with a hole that is used to distribute the load of a threaded fastener like a bolt or nut.

A permanent mechanical fastener that consists of a smooth cylindrical shaft with a head on one end. The end opposite the head is deformed after installation.

An unthreaded fastener that can be either straight or tapered, used to locate or hold parts together.

A metal fastener with two tines that are bent during installation, used to secure other fasteners like nuts or bolts.

A type of fastener that is used to connect structural and non-structural elements to concrete.

A type of screw generally used to secure an object within or against another object, typically without the use of a nut.

A U-shaped metal fastener used to join or bind materials together, often driven into the surface with a hammer or staple gun.

A type of fastener that is used to hold items together, primarily electrical cables or wires.

A fastener that holds components onto a shaft or in a housing/bore when installed in a groove.

A substance capable of holding two surfaces together in a strong and lasting bond, used in various applications where traditional fasteners are not viable.

A device used to hold or secure objects tightly together to prevent movement or separation through the application of inward pressure.

A type of fastener that has both a male and female part with internal and external threads, used to bind or fasten two pieces of material together.

A clamp used for holding or securing cables, hoses, and wires in place.

A fastener used for attaching objects to concrete, consisting of a tubular shield that expands when the bolt is tightened.

A fastener for hanging objects on hollow walls or for fastening through panels with a hole behind them. It has a winged end that spreads the load over a wider area.

A type of rivet that can be fully installed from one side of the material, also known as a 'pop' rivet.

A tool used to drive bolts and screws with hexagonal sockets in their heads.

A device used to secure a hose over a fitting, thereby preventing any fluid flowing through the hose from leaking at the connection.

A pin-shaped, sharp object of hard metal or alloy used as a fastener, typically driven into the material by a hammer, pneumatic nail gun, or electric nail gun.

A long, rod-like fastener with threading on both ends; its length allows it to be cut or combined with standard nuts and washers for custom fastening applications.

A hollow, cylindrical pin that is slit longitudinally to allow for compression during insertion into holes of smaller diameter.