Discover published sets by community

Remove lint build-up from the feed dogs and bobbin area after every project to ensure smooth operation.

Replace the sewing machine needle after every 8 hours of sewing to prevent damage to fabric and ensure accurate stitching.

Apply sewing machine oil to the specified parts to maintain smooth operation, typically every 20 hours of use or according to manufacturer’s guidelines.

Test and adjust the tension settings periodically, especially before starting a new project, to ensure even stitches.

Regularly inspect the bobbin for damage and clean the bobbin case to prevent sewing issues, ideally after every project.

Change the sewing machine light bulb if it burns out or dims to ensure you have good visibility while sewing. This is done as needed.

Inspect the power cord and foot pedal for wear or damage at least bi-annually or if you suspect an issue.

For computerized machines, install software updates as they become available to keep features up-to-date and maintain performance.

Check and tighten any visible screws, especially the needle clamp and presser foot screws, every few months or when they appear loose.