Discover published sets by community

Similar to the plow anchor but with a fixed shank, the delta anchor has a high holding power across different seabeds. It's commonly used on larger boats and is effective in grass, sand, and mud.

Characterized by its large flukes and long shank, the admiralty pattern anchor is good for rocky and seaweed bottoms but has less holding power in sand or mud. It is best used on larger vessels or in strong currents.

This type of anchor is shaped like a mushroom and buries itself in silt or mud. It is normally used for permanent moorings and is ineffective in most other seabed types.

Comprised of multiple hooks or tines, grapnel anchors catch on rocky bottoms or debris. They have limited holding power in other types of seabeds and are usually used for small boats or as temporary anchors.

With its claw-like shape, the Bruce anchor sets easily and holds well in a variety of seabeds, although it may not hold as well in very soft mud. It is a popular choice for its all-around performance.

Lightweight and easy to store, fluke anchors have two large flat flukes that dig into sediment. Ideal for small boats and in sandy, muddy or clay bottoms.

Traditional design with flukes that dig into the seabed, the navy anchor is heavy and usually made of cast iron. It's best used in a variety of bottom types but requires manual resetting if it becomes dislodged.

Plow-shaped and can swivel at the shank, this anchor digs into the sea floor and maintains a good hold even with wind and tide changes. Suitable for a variety of seabeds.

Screw anchors are driven into the seabed by turning. They offer a very high holding power and are used for permanent moorings, especially in soft seabed conditions.