Discover published sets by community

Reposition microphones away from speakers, adjust equalizer settings, use directional microphones.

Examine speaker placement and angle, adjust sound system equalization, and consider using room correction software.

Adjust the audio levels to avoid clipping, ensure speaker impedance matches the amplifier, replace damaged speakers.

Inspect cables and connectors for damage, replace failing components, and prevent overloading connections.

Check for ground loops, ensure cable quality and shielding is adequate, and inspect for electromagnetic interference.

Identify and eliminate the source of noise, use noise gates, and apply directional microphones.

Check for latency in the signal chain, adjust digital processing settings, and verify sync between video and audio if applicable.

Ensure all cables are securely connected, check the power supply to the devices, and verify the sound source is playing.

Check the amplifier's power, adjust input gain levels, and make sure volume limiters are not engaged.

Use a pop filter, ensure proper microphone handling, and educate speakers on proper mic technique.

Look for loose wire connections, damaged cables, or issues with the sound source.

Provide adequate ventilation, ensure proper rack spacing for equipment, and check for faulty cooling fans.

Calibrate the sound system, check for phase issues, and replace any worn out components.

Adjust the equalizer to reduce low frequencies, position speakers to minimize resonance, and use high-pass filters.