Explore tens of thousands of sets crafted by our community.
Writing Clear Procedure Steps
20
Flashcards
0/20
Turning the valve clockwise can make the pressure normal.
Turn the valve clockwise to normalize pressure.
Do not forget to verify that the device is secured tightly.
Verify that the device is secured tightly.
Seeking out the help button is necessary when in trouble.
Press the help button if you encounter trouble.
Go and collect all necessary materials.
Gather all the necessary materials.
It's important to be putting the widget in the machine before starting it.
Insert the widget into the machine before powering it on.
If you happen to spill anything, it's critical to be cleaning it up immediately.
If you spill anything, clean it up immediately.
Check the plug to be properly inserted in the socket before use.
Ensure the plug is properly inserted in the socket before use.
It is needed to press the red button so the system restarts.
Press the red button to restart the system.
You must make sure that you're reading the instructions carefully.
Read the instructions carefully.
Make sure to look out for errors whilst reviewing the document.
Review the document for errors.
Inputs of data are to be done carefully.
Enter data carefully.
One must be aware of the temperature settings not being too high.
Ensure the temperature settings are not too high.
Shut it off just in case something unusual is noticed.
If something unusual is noticed, shut it off immediately.
The components then need to be assembled in a correct manner.
Assemble the components correctly.
Proceed with entering your data after logging into the system.
Log into the system then enter your data.
It's a good practice to be double-checking your calculations.
Double-check your calculations.
Don't neglect wearing the gloves to avoid contamination.
Wear gloves to prevent contamination.
Carefully, one should align the marks before the pieces are joined together.
Align the marks carefully before joining the pieces.
The user should wait for some minutes until the installation is complete.
Wait a few minutes until the installation completes.
You're gonna want to remove the cap before adding the liquid.
Remove the cap before adding the liquid.
© Hypatia.Tech. 2024 All rights reserved.
